51单片机洗衣机控制板及C语言程序

51单片机洗衣机控制板及C语言程序，该控制板单片机采用AT89C51单片机，所设计全自动洗衣机功能有：标准洗衣、经济洗衣、单独洗衣以及排水四种洗衣等四种方式，有强洗、弱洗及运行/暂停、显示及报警功能,程序利用利用Protues仿真软件观察洗衣机的运行状态和过程。整个设计能达到预想的设计效果。

#include 'reg51.h'

#define uchar unsigned char

#define uint unsigned int

#define Enable(); EA=1;

#define Disable(); EA=0;

#define BIAOZHUN 0

#define JINGJI 1

#define DANDU 2

#define PAISHUI 3

#define QIANGXI 0

#define RUOXI 1

#define T_JinShui 240 //4min*60s

#define T_PaiShui 60 //1min*60s

#define T_XiDi 360 //6min*60s

#define T_PiaoXi_1 240 //4min*60s

#define T_PiaoXi_2 120 //2min*60s

#define T_TuoShui 120 //2min*60s

#define ZHENGZHUAN 0

#define STOP 1

#define FANZHUAN 2

#define ZhengZhuan(); PIN_Motor_A = 0; PIN_Motor_B = 1;

#define Stop(); PIN_Motor_A = 1; PIN_Motor_B = 1;

#define FanZhuan(); PIN_Motor_A = 1; PIN_Motor_B = 0;

#define ZanTing(); ET0 = 0; ET1 = 0; Stop();

#define JiXu(); ET0 = 1; ET1 = 1;

#define flag_Ok (flag_JinShui||flag_PaiShui||flag_XiDi||flag_PiaoXi||flag_TuoShui)

sbit LED_BiaoZhun = P1^0; //标准程序显示灯

sbit LED_JingJi = P1^1; //经济程序显示灯

sbit LED_DanDu = P1^2; //单独程序显示灯

sbit LED_PaiShui = P1^3; //排水程序显示灯

sbit LED_QiangXi = P1^4; //强洗状态灯

sbit LED_RuoXi = P1^5; //弱洗状态灯

sbit LED_XiDi = P1^6; //洗涤状态灯

sbit LED_PiaoXi = P1^7; //漂洗状态灯

sbit LED_TuoShui = P2^0; //脱水状态灯

sbit PIN_BaoJing = P2^1; //报警喇叭

sbit PIN_JinShui = P2^2; //进水控制

sbit PIN_PaiShui = P2^3; //排谁控制

sbit PIN_Motor_A = P2^4; //电机脚A

sbit PIN_Motor_B = P2^5; //电机脚B