红外遥控电路
扫描二维码
随时随地手机看文章
红外遥控电路--Infrared Remote Control
This circuit will allow you to turn on any piece of equipment that operates on 115 volts ac. The reciever circuit is based on the Radio Shack infrared receiver module(MOD), part number 276-137. It is also available from some of the other sources listed on my Links page. The MOD accepts a 40khz IR signal that is modulated at 4 khz. When a signal is recieved the MOD will go low. The sensitivity of the MOD is set by different values for R1 and C1.
The values for R1 may need to be as high as 10,000 ohms and for C1 40uf. This will prevent the unit from turning on under normal lighting conditions. You will need to experiment with the vaules that work best for you. The output of the 4013 chip a flip flop toggles on and off with the reception of a IR pulse. The output of the 4013 turns on the MOC optical coupler which in turn switches on the triac and supplies power to the AC load.
下载文档
热门文章
编辑精选
论坛活动
技术子站
资料下载
技术学院
- TrendForce集邦咨询：存储器产业2026年资本支出仍显保守，对位元产出成长助力有限
- TrendForce集邦咨询: 新机带动需求回温，2025年第三季度全球智能手机面板出货量季增8.1%
- TrendForce集邦咨询: 预计2026年CSP合计资本支出增至6,000亿美元以上，AI硬件生态链迎新成长周期
- TrendForce集邦咨询: 预计2035年全球固态电池需求量将达到740GWh
- TrendForce集邦咨询: CSP、主权云需求持续强劲，预估2026年AI Server出货将年增逾20%
- TrendForce集邦咨询: DRAM供应吃紧推高DDR5合约价，2026年获利有望超越HBM3e
- 罗姆面向下一代800 VDC架构发布电源解决方案白皮书
- TrendForce集邦咨询：IT OLED面板大世代竞争升温，FMM阵营领跑、FMM-free阵营加速推进
