LPC1788的EMC驱动norflash

Norflash型号为sst39vf32

#ifndef __NORFLASH_H_

#define __NORFLASH_H_

#include "common.h"

#include "delay.h"

#include "debugserial.h"

#define NOR_FLASH_BASE 0x80000000

#define NOR_FLASH_SIZE 0x00100000

#define GET_ADDR(addr) (volatile uint16_t *)(NOR_FLASH_BASE | (addr<<1))

#define SECTOR_SIZE 0x800 /* Must be 2048 words for 39VF160 */

#define BLOCK_SIZE 0x8000 /* Must be 32K words for 39VF160 */

#define SST_ID 0xBF /* SST Manufacturer's ID code */

#define SST_39VF160 0x235D /* SST 39VF160 device code */

#define PROGRAM_TIMEOUT 0x00008000

//norflash 初始化必须在sram初始化之前

void norflash_init(void);

void norflash_erase(void);

u32 norflash_check_id(void);

u32 norflash_write_word(u32 add,u16 data);

u32 norflash_toggle_bit_check(u32 addr,u16 data);

#endif

#include "norflash.h"

static void norflash_io_init(void)

{

//a0-a22

/* init EMC_A1 */

LPC_IOCON->P4_1=0x21;

/* init EMC_A2 */

LPC_IOCON->P4_2=0x21;

/* init EMC_A3 */

LPC_IOCON->P4_3=0x21;

/* init EMC_A4 */

LPC_IOCON->P4_4=0x21;

/* init EMC_A5 */

LPC_IOCON->P4_5=0x21;

/* init EMC_A6 */

LPC_IOCON->P4_6=0x21;

/* init EMC_A7 */

LPC_IOCON->P4_7=0x21;

/* init EMC_A8 */

LPC_IOCON->P4_8=0x21;

/* init EMC_A9 */

LPC_IOCON->P4_9=0x21;

/* init EMC_A10 */

LPC_IOCON->P4_10=0x21;

/* init EMC_A11 */

LPC_IOCON->P4_11=0x21;

/* init EMC_A12 */

LPC_IOCON->P4_12=0x21;

/* init EMC_A13 */

LPC_IOCON->P4_13=0x21;

/* init EMC_A14 */

LPC_IOCON->P4_14=0x21;

/* init EMC_A15 */

LPC_IOCON->P4_15=0x21;

/* init EMC_A16 */

LPC_IOCON->P4_16=0x21;

/* init EMC_A17 */

LPC_IOCON->P4_17=0x21;

/* init EMC_A18 */

LPC_IOCON->P4_18=0x21;

/* init EMC_A19 */

LPC_IOCON->P4_19=0x21;

/* init EMC_A20 */

LPC_IOCON->P4_20=0x21;

/* init EMC_A21 */

LPC_IOCON->P4_21=0x21;

/* init EMC_A22 */

LPC_IOCON->P4_22=0x21;

//d0-d15

/* init EMC_D0 */

LPC_IOCON->P3_0=0x21;

/* init EMC_D1 */

LPC_IOCON->P3_1=0x21;

/* init EMC_D2 */

LPC_IOCON->P3_2=0x21;

/* init EMC_D3 */

LPC_IOCON->P3_3=0x21;

/* init EMC_D4 */

LPC_IOCON->P3_4=0x21;

/* init EMC_D5 */

LPC_IOCON->P3_5=0x21;

/* init EMC_D6 */

LPC_IOCON->P3_6=0x21;

/* init EMC_D7 */

LPC_IOCON->P3_7=0x21;

/* init EMC_D8 */

LPC_IOCON->P3_8=0x21;

/* init EMC_D9 */

LPC_IOCON->P3_9=0x21;

/* init EMC_D10 */

LPC_IOCON->P3_10=0x21;

/* init EMC_D11 */

LPC_IOCON->P3_11=0x21;

/* init EMC_D12 */

LPC_IOCON->P3_12=0x21;

/* init EMC_D13 */

LPC_IOCON->P3_13=0x21;

/* init EMC_D14 */

LPC_IOCON->P3_14=0x21;

/* init EMC_D15 */

LPC_IOCON->P3_15=0x21;

/* init EMC_WE */

LPC_IOCON->P4_25=0x21;

/* init EMC_oe */

LPC_IOCON->P4_24=0x21;

/* init EMC_cs0 */

LPC_IOCON->P4_30=0x21;

}

void norflash_init(void)

{

LPC_SC->SCS|=(1<<0);//emc地址不移位

//打开emc时钟与端口时钟

LPC_SC->PCONP|=(1<<15)|(1<<11);//打开时钟

LPC_SC->EMCDLYCTL=0x00001010;//延时时间初始化

LPC_EMC->Control=0x00000001;//emc使能

LPC_EMC->Config=0x00000000;//emc配置清零,小端模式

norflash_io_init();

DelayMs(100);

LPC_EMC->StaticConfig0&=~(3<<0); //

LPC_EMC->StaticConfig0|=(1<<0); //设置总线宽度16位

LPC_EMC->StaticConfig0|=(1<<7); //设置读写有效电平,读为低电平

LPC_EMC->StaticWaitWen0&=~(7<<0);

LPC_EMC->StaticWaitWen0|=(2<<0);//设置片选到写使能的延时时间

LPC_EMC->StaticWaitOen0&=~(7<<0);

LPC_EMC->StaticWaitOen0|=(2<<0);//设置片选到输出使能的延时

LPC_EMC->StaticWaitWr0&=~(0x1f<<0);

LPC_EMC->StaticWaitWr0|=(0x1f<<0);//设置片选到写入的延时

LPC_EMC->StaticWaitPage0&=~(0x1f<<0);

LPC_EMC->StaticWaitPage0|=(0x1f<<0);//设置读模式顺序存取延时

LPC_EMC->StaticWaitRd0&=~(0x1f<<0);

LPC_EMC->StaticWaitRd0|=(0x1f<<0);//设置片选到读取的延时

LPC_EMC->StaticWaitTurn0&=~(0x1f<<0);

LPC_EMC->StaticWaitTurn0|=(0x1f<<0);//设置总线周转周期

DelayMs(100);

}

void norflash_erase(void)

{

volatile uint16_t*ip;

ip=GET_ADDR(0x5555);

*ip=0x00AA;

ip=GET_ADDR(0x2AAA);

*ip=0x0055;

ip=GET_ADDR(0x5555);

*ip=0x0080;

ip=GET_ADDR(0x5555);

*ip=0x00AA;

ip=GET_ADDR(0x2AAA);

*ip=0x0055;

ip=GET_ADDR(0x5555);

*ip=0x0010;

DelayMs(10); /* Use timer 1 */

return;

}

//检查nand id

u32 norflash_check_id(void)

{

volatile uint16_t*ip;

uint16_t SST_id1,SST_id2;

/* Issue the Software Product ID code to 39VF160 */

ip=GET_ADDR(0x5555);

*ip=0x00AA;

ip=GET_ADDR(0x2AAA);

*ip=0x0055;

ip=GET_ADDR(0x5555);

*ip=0x0090;

DelayMs(10);

/* Read the product ID from 39VF160 */

ip=GET_ADDR(0x0000);

SST_id1=*ip&0x00FF;

ip=GET_ADDR(0x0001);

SST_id2=*ip;

/* Issue the Soffware Product ID Exit code thus returning the 39VF160 */

/* to the read operating mode */

ip=GET_ADDR(0x5555);

*ip=0x00AA;

ip=GET_ADDR(0x2AAA);

*ip=0x0055;

ip=GET_ADDR(0x5555);

*ip=0x00F0;

DelayMs(10);

/* Check ID */

if((SST_id1==SST_ID)&&(SST_id2==SST_39VF160))

{

return(0);

}

else

{

printf("SST_id1 = %x rn",SST_id1);

p