当前位置:首页 > 汽车电子 > 汽车电子
[导读]Freescale 公司的MC9S12XHY系列是16位微控制器,具有高性能的32位特性, CPU12XV1 CPU内核具有高达40MHz总线频率,支持CAN和LIN/J2602通信,并提供多达4个步进马达控制以及40x4 LCD驱动器,带ECC特性的多达245KB片上闪存和

Freescale 公司的MC9S12XHY系列是16位微控制器,具有高性能的32位特性, CPU12XV1 CPU内核具有高达40MHz总线频率,支持CAN和LIN/J2602通信,并提供多达4个步进马达控制以及40x4 LCD驱动器,带ECC特性的多达245KB片上闪存和8KB数据闪存,12KB片上SRAM等功能.目标用在低端仪表盘,汽车HVAC步进马达以及汽车音频系统.本文介绍了MC9S12XHY256主要特性,方框图,以及DEMO9S12XHY256演示板主要特性和电路图.

The MC9S12XHY family is an optimized, automotive, 16-bit microcontroller product line focused on low-cost and high-performance. This family is intended to bridge from low-end 16-bit microcontrollers, such as MC9S12HY family, to high performance 32-bit solutions. The MC9S12XHY family is targeted at the lower end of automotive instrument cluster applications, it includes support for CAN and LIN/J2602 communication and delivers typical cluster requirements such as stepper motor control with stepper stall detection (SSD) and LCD Driver.

The MC9S12XHY family delivers all the advantages and efficiencies of a 16-bit MCU while retaining the low cost, power consumption, EMC, and code-size efficiency advantages currently enjoyed by users of Freescale’s existing 8-bit and 16-bit MCU families. Like the MC9S12HY family, the MC9S12XHY family will run 16-bit wide accesses without wait states for all peripherals and memories. The MC9S12XHY family will be available in 100-pin LQFP and 112-pin LQFP package options and aims to maximize pin compatibility with the MC9S12HY family in the 100 LQFP. In addition to the I/O ports available in each module, further I/O ports are available with interrupt capability allowing wake-up from stop or wait modes.

MC9S12XHY256主要特性:

CPU12XV1 CPU core, with up to 40Mhz bus frequency

Up to 256 Kbyte on-chip flash with ECC and 8Kbyte data flash with ECC.

Up to 12Kbyte on-chip SRAM

Up to 40x4 LCD driver

Stepper Motor Controller with up to drivers for up to 4 motors, plus four Stepper Stall Detector modules (one for each motor)

Phase locked loop (IPLL) frequency multiplier with internal filter, supporting 4–16 MHz amplitude controlled Pierce oscillator

Pulse width modulation (PWM) module and Two timer modules (TIM0 and TIM1)

Up to 12-channel, 10-bit resolution successive approximation analog-to-digital converter (ATD)

serial peripheral interface (SPI) module and Inter-IC bus interface (IIC) module

Two serial communication interface (SCI) module supporting LIN communications
Two multi-scalable controller area network (MSCAN) module (supporting CAN protocol 2.0A/B)

On-chip voltage regulator (VREG) for regulation of input supply and all internal voltages

Autonomous periodic interrupt (API) and up to 25 key wakup inputs

MC9S12XHY256目标应用:

Low end instrument cluster

Automotive HVAC stepper motor based actuator control

Automotive Audio system

图1. MC9S12XHY系列方框图

DEMO9S12XHY256演示板

The DEMO9S12XHY256 is a demonstration board for the MC9S12XHY256 microcontroller. Application development is quick and easy with the integrated USB-BDM, sample software tools, and examples. An optional BDM_PORT port is also provided to allow use of a BDM_PORT cable. A 40-pin connector provides access to most IO signals on the target MCU.

DEMO9S12XHY256演示板主要特性:

On-Board 4x40 Custom LCD Glass

2 ea. High-Speed CAN Physical Layer Transceivers

Enhanced LIN Physical Layer Transceiver

RS-232 Serial Data Physical Layer Transceiver

Integrated USB-BDM. BDM_PORT header for external BDM cable support

MCU_PORT pin header for access to MCU IO signals

On-board +5V regulator

Optional Power from USB-BDM or MCU_PORT connector

Power Input Selection Jumpers, select from USB-BDM, on-board regulator, Connector J1. Optional Power output through Connector J1

User Components Provided, including 5 Push Switches, 6 LED Indicators, 5K ohm POT w /LP Filter

User Option Jumpers to disconnect Peripherals

Connectors, including 40-pin MCU I/O Pin Header, Barrel Connector, BDM_PORT Connector for External BDM Cable, USB/DB9/CAN cable/LIN cable Connector

DEMO9S12XHY256演示板包括:

DEMO9S12XHY256 Demo Board

DEMO9S12XHY256 user guide

"Quick Start Guide" sheet

a USB cable

a RS232 SERIAL cable

CodeWarriorTM Development Studio Special Edition CD-ROM

AXIOM 68HC12 development System support CD-ROM

Warranty card

Technical Information Center sheet

图2.DEMO9S12XHY256演示板外形图

图3.DEMO9S12XHY256演示板电路图(1)

图4.DEMO9S12XHY256演示板电路图(2)

图5.DEMO9S12XHY256演示板电路图(3)

本站声明: 本文章由作者或相关机构授权发布,目的在于传递更多信息,并不代表本站赞同其观点,本站亦不保证或承诺内容真实性等。需要转载请联系该专栏作者,如若文章内容侵犯您的权益,请及时联系本站删除。
换一批
延伸阅读

Mobileye推出DMS技术 ,实现人与车辆协同驾驶 上海2025年7月23日 /美通社/ -- 多年来,驾驶员监测系统始终致力于应对道路安全中最重大的风险来源:人为因素。但疲劳驾驶、分心驾驶和酒驾/毒驾等每年仍会造...

关键字: 监测系统 MOBILEYE DM ADAS

上海 2025年7月3日 /美通社/ -- 全球领先的电子设计与制造服务供货商──USI环旭电子股份有限公司,宣布成功交付一项Level 10等级的全系统联合设计制造(JDM)项目,协助国际客户开发一款轻量化AI边缘运...

关键字: LEVEL 电子 边缘运算 DM

深圳2025年4月17日 /美通社/ -- 4月16日,戴盟机器人正式发布革命性家族产品——全球首款多维高分辨率高频率视触觉传感器 DM-Tac W、多维触觉感知五指灵巧手 DM-Hand1、便携穿戴式遥操作数据采集系统...

关键字: 进程 DM 机器人 触觉传感器

-- 以极致性能与场景融合打造智能移动终端新标杆 上海2025年2月24日 /美通社/ -- 2025年2月18日,商米在全球零售科技盛会EuroCIS 2025上正式发布...

关键字: BSP 移动终端 Wi-Fi DM

曼谷2024年11月12日 /美通社/ -- 近日, 2024 Intel LOEM Summit在泰国曼谷隆重举行,汇聚了全球各地的OEM、ODM及系统集成商,增进交流合作、分享发展经验、共探产业机会。长城国际(000...

关键字: OEM 英特尔 DM 笔记本电脑

上海2024年10月14日 /美通社/ -- DMSM 2024-第十四届数字营销与社交媒体峰会暨金营奖颁奖典礼,将于10月16-18号于上海正式拉开序幕。来自(排名不分先后)德勤、艾默生、英飞凌、泰克科技、采埃孚、施耐...

关键字: DM AI 数字化 SI

制造业降本增效新利器 上海2024年9月27日 /美通社/ -- 9月20日,远铸智能发布全新工业级高速FDM 3D打印设备FUNMAT PRO 310 NEO。这款产品集结了远铸智能多年深耕工业级FDM 3D打印的经...

关键字: 工业级 3D打印机 NEO DM

点击此处即可下载,或关注【远铸智能 INTAMSYS】公众号下载 上海2024年7月19日 /美通社/ -- 高温腔室技术在 FDM 3D 打印领域一直备受关注,其应用价值也得到市场认可。然而,关于高温腔室技...

关键字: 3D打印 DM AMS ABS

5 月 28 日,比亚迪举办了第五代 DM 技术发布暨秦 L DM-i、海豹 06 DM-i 上市发布会。据悉, 新一代 DM 技术采用了以电为主的动力架构、全温域整车热管理架构及智电融合电子电气架构等。

关键字: 比亚迪 DM 刀片电池

上海2024年5月14日 /美通社/ -- 2024年5月9日,富士胶片控股株式会社(以下简称"富士胶片集团")公布了2023财年的财务业绩。 数据显示,截止2024年3月31日,得益于医疗系统...

关键字: 富士 CD DM 影像
关闭