当前位置:首页 > 工业控制 > 电子设计自动化

Avnet公司的Xilinx Spartan-6 LX150T开发套件是采用Xilinx公司的XC6SLX150T-3FGG676器件,它的串行吉比特收发器接口(GTP)能连接到片上PCI Express® x1硬宏元或PCI Express x4软宏元,一个SFP连接器和一个SATA主接口.系统板包括DDR3,SDRAM,闪存,10/100/1000以太网PHY和串行口,其它特性还包括USB端口。

可编LVDS时钟,用户开关和LED,还提供两个FMC LPC扩展槽和总数136个高速单端和差分用户I/O.本文介绍了Xilinx Spartan-6 FPGA主要特性和系列产品,几种应用框图以及Xilinx Spartan-6 LX150T开发板主要特性,框图,电路图和材料清单.

Spartan®-6 LX FPGAs are optimized for applications that require the absolute lowest cost. Now with up to 42% less power consumption and a 12% increase in performance enabled by ISE® Design Suite, they provide up to 150K logic cells, integrated PCI Express® blocks, advanced memory support, 250MHz DSP slices, and 3.2Gbps low-power transceivers.

Spartan 6 LX150T Development Board

The Spartan-6 family provides leading system integration capabilities with the lowest total cost for high-volume applications. The thirteen-member family delivers expanded densities ranging from 3,840 to 147,443 logic cells, with half the power consumption of previous Spartan families, and faster, more comprehensive connectivity. Built on a mature 45 nm low-power copper process technology that delivers the optimal balance of cost, power, and performance, the Spartan-6 family offers a new, more efficient, dual-register 6-input lookup table (LUT) logic and a rich selection of built-in system-level blocks. These include 18 Kb (2 x 9 Kb) block RAMs, second generation DSP48A1 slices, SDRAM memory controllers, enhanced mixed-mode clock management blocks, SelectIO?technology, poweroptimized high-speed serial transceiver blocks, PCI Express?compatible Endpoint blocks, advanced system-level power management modes, auto-detect configuration options, and enhanced IP security with AES and Device DNA protection. These features provide a lowcost programmable alternative to custom ASIC products with unprecedented ease of use. Spartan-6 FPGAs offer the best solution for high-volume logic designs, consumer-oriented DSP designs, and cost-sensitive embedded applications. Spartan-6 FPGAs are the programmable silicon foundation for Targeted Design Platforms that deliver integrated software and hardware components that enable designers to focus on innovation as soon as their development cycle begins.

Spartan-6 FPGA主要特性:

Spartan-6 Family:

Spartan-6 LX FPGA: Logic optimized

Spartan-6 LXT FPGA: High-speed serial connectivity

Designed for low cost

Multiple efficient integrated blocks

Optimized selection of I/O standards

Staggered pads

High-volume plastic wire-bonded packages

Low static and dynamic power

45 nm process optimized for cost and low power

Hibernate power-down mode for zero power

Suspend mode maintains state and configuration with multi-pin wake-up, control enhancement

Lower-power 1.0V core voltage (LX FPGAs, -1L only)

High performance 1.2V core voltage (LX and LXT

FPGAs, -2, -3, and -3N speed grades)

Multi-voltage, multi-standard SelectIO?interface banks

Up to 1,080 Mb/s data transfer rate per differential I/O

Selectable output drive, up to 24 mA per pin

3.3V to 1.2V I/O standards and protocols

Low-cost HSTL and SSTL memory interfaces

Hot swap compliance

Adjustable I/O slew rates to improve signal integrity

High-speed GTP serial transceivers in the LXT FPGAs

Up to 3.2 Gb/s

High-speed interfaces including: Serial ATA, Aurora,

1G Ethernet, PCI Express, OBSAI, CPRI, EPON, GPON, DisplayPort, and XAUI

Integrated Endpoint block for PCI Express designs (LXT)

Low-cost PCI?technology support compatible with the

33 MHz, 32- and 64-bit specification.

Efficient DSP48A1 slices

High-performance arithmetic and signal processing

Fast 18 x 18 multiplier and 48-bit accumulator

Pipelining and cascading capability

Pre-adder to assist filter applications

Integrated Memory Controller blocks

DDR, DDR2, DDR3, and LPDDR support

Data rates up to 800 Mb/s (12.8 Gb/s peak bandwidth)

Multi-port bus structure with independent FIFO to reduce design timing issues

Abundant logic resources with increased logic capacity

Optional shift register or distributed RAM support

Efficient 6-input LUTs improve performance and minimize power

LUT with dual flip-flops for pipeline centric applications

Block RAM with a wide range of granularity

Fast block RAM with byte write enable

18 Kb blocks that can be optionally programmed as two independent 9 Kb block RAMs

Clock Management Tile (CMT) for enhanced performance

Low noise, flexible clocking

Digital Clock Managers (DCMs) eliminate clock skew and duty cycle distortion

Phase-Locked Loops (PLLs) for low-jitter clocking

Frequency synthesis with simultaneous multiplication, division, and phase shifting

Sixteen low-skew global clock networks

Simplified configuration, supports low-cost standards

2-pin auto-detect configuration

Broad third-party SPI (up to x4) and NOR flash support

Feature rich Xilinx Platform Flash with JTAG

MultiBoot support for remote upgrade with multiple bitstreams, using watchdog protection

Enhanced security for design protection

Unique Device DNA identifier for design authentication

AES bitstream encryption in the larger devices

Faster embedded processing with enhanced, low cost, MicroBlaze?soft processor

Industry-leading IP and reference designs

Spartan- 6 FPGA系列产品:







图1.Spartan- 6 FPGA系列汽车娱乐框图



图2.Spartan- 6 FPGA系列平板显示器框图



图3.Spartan- 6 FPGA系列视频监视框图

Xilinx Spartan-6 LX150T开发板

The Xilinx Spartan-6 LX150T Development Kit provides a complete development platform for designing and verifying applications based on the Xilinx Spartan-6 LXT FPGA family. Available with the Spartan-6 LX150T, the kit enables designers to prototype high-performance designs with ease, while providing expandability and customization through the dual FMC LPC expansion slots.

The Spartan-6 LX150T system board is available with the LX150T device (XC6SLX150T-3FGG676). Serial gigabit transceiver interface (GTPs) provide connection to the on-chip PCI Express® x1 hard macro or a PCI Express x4 soft macro, one SFP connector, and a SATA Host interface. The system board includes DDR3 SDRAM, Flash memory, a 10/100/1000 Ethernet PHYs, and a serial port. Other board features include a USB port, a programmable LVDS clock, user switches, and LEDs. The board also provides two FMC LPC expansion slots, providing a total of 136 high-speed, single-ended and differential user I/O. FMC modules can be easily added to the board for additional application specific functions.

Xilinx Spartan-6 LX150T开发板主要特性:

FPGA

— Xilinx Spartan-6 XC6SLX150T-3FGG676C FPGA

I/O Connectors

— Two FMC LPC general-purpose I/O expansion connectors

— One SD card connector

— Avnet LCD Interface (ALI) connector

RocketIO™ GTP Transceiver Connectors

— One Small-Form Pluggable (SFP) cage

— Two transceivers supplied on an FMC connectors for use by an expansion module

— One PCI Express add-in card interface (4 lanes @ 2.5 Gbps)

— One SATA host connector

Memory

— 128 MB DDR3 SDRAM components

— 32 MB FLASH

Communication

— RS-232 serial port

— USB 2.0

— USB-RS232 Port

— 10/100/1000 Ethernet port

Power

— Regulated 5.0, 3.3, 2.5, 1.8, 1.5 and 1.2 V supply voltages derived from the PCI Express slot or an external 12 V supply

— SSTL2 Termination Regulators

— Point of Load Regulators for MGT supply rails

Configuration


— XCF32 and XCF08 Platform Flash Configuration Flash


— Xilinx Parallel Cable IV or Platform USB Cable support for JTAG Programming/Configuration



图4.Xilinx Spartan-6 LX150T开发板外形图

Xilinx Spartan-6 LX150T开发板包括:

Xilinx Spartan-6 LX150T development board

12 V power supply

One license voucher for ISE® Design Suite: Logic Edition license (device-locked to Xilinx Spartan-6 LX150T FPGA)

Getting Started Guide

Downloadable documentation and reference design



图5.Xilinx Spartan-6 LX150T开发板框图



图6.Xilinx Spartan-6 LX150T开发板电源框图



图7.Xilinx Spartan-6 LX150T开发板跨接器,插座和连接器分布图


Xilinx Spartan-6 LX150T开发板电路图见:
Xilinx Spartan-6 LX150T开发板电路图.pdf


Xilinx Spartan-6 LX150T开发板材料清单见:
Xilinx Spartan-6 LX150T开发板材料清单.pdf

详情请见:
http://www.xilinx.com/support/documentation/data_sheets/ds160.pdf

https://www.em.avnet.com/Support%20And%20Downloads/xlx_s6_lx150t_dev-ug_rev1.2_120210.pdf
以及
https://www.em.avnet.com/Support%20And%20Downloads/xlx_s6_lx150t_dev-sch-revd090810.pdf



本站声明: 本文章由作者或相关机构授权发布,目的在于传递更多信息,并不代表本站赞同其观点,本站亦不保证或承诺内容真实性等。需要转载请联系该专栏作者,如若文章内容侵犯您的权益,请及时联系本站删除。
换一批
延伸阅读

LED驱动电源的输入包括高压工频交流(即市电)、低压直流、高压直流、低压高频交流(如电子变压器的输出)等。

关键字: 驱动电源

在工业自动化蓬勃发展的当下,工业电机作为核心动力设备,其驱动电源的性能直接关系到整个系统的稳定性和可靠性。其中,反电动势抑制与过流保护是驱动电源设计中至关重要的两个环节,集成化方案的设计成为提升电机驱动性能的关键。

关键字: 工业电机 驱动电源

LED 驱动电源作为 LED 照明系统的 “心脏”,其稳定性直接决定了整个照明设备的使用寿命。然而,在实际应用中,LED 驱动电源易损坏的问题却十分常见,不仅增加了维护成本,还影响了用户体验。要解决这一问题,需从设计、生...

关键字: 驱动电源 照明系统 散热

根据LED驱动电源的公式,电感内电流波动大小和电感值成反比,输出纹波和输出电容值成反比。所以加大电感值和输出电容值可以减小纹波。

关键字: LED 设计 驱动电源

电动汽车(EV)作为新能源汽车的重要代表,正逐渐成为全球汽车产业的重要发展方向。电动汽车的核心技术之一是电机驱动控制系统,而绝缘栅双极型晶体管(IGBT)作为电机驱动系统中的关键元件,其性能直接影响到电动汽车的动力性能和...

关键字: 电动汽车 新能源 驱动电源

在现代城市建设中,街道及停车场照明作为基础设施的重要组成部分,其质量和效率直接关系到城市的公共安全、居民生活质量和能源利用效率。随着科技的进步,高亮度白光发光二极管(LED)因其独特的优势逐渐取代传统光源,成为大功率区域...

关键字: 发光二极管 驱动电源 LED

LED通用照明设计工程师会遇到许多挑战,如功率密度、功率因数校正(PFC)、空间受限和可靠性等。

关键字: LED 驱动电源 功率因数校正

在LED照明技术日益普及的今天,LED驱动电源的电磁干扰(EMI)问题成为了一个不可忽视的挑战。电磁干扰不仅会影响LED灯具的正常工作,还可能对周围电子设备造成不利影响,甚至引发系统故障。因此,采取有效的硬件措施来解决L...

关键字: LED照明技术 电磁干扰 驱动电源

开关电源具有效率高的特性,而且开关电源的变压器体积比串联稳压型电源的要小得多,电源电路比较整洁,整机重量也有所下降,所以,现在的LED驱动电源

关键字: LED 驱动电源 开关电源

LED驱动电源是把电源供应转换为特定的电压电流以驱动LED发光的电压转换器,通常情况下:LED驱动电源的输入包括高压工频交流(即市电)、低压直流、高压直流、低压高频交流(如电子变压器的输出)等。

关键字: LED 隧道灯 驱动电源
关闭