当前位置:首页 > 厂商动态 > 意法半导体
[导读]Accelerating development of compact and reliable fans and pumps built with energy-efficient motors, STMicroelectronics has introduced the PWD5T60 three-phase driver with a ready-to-use evaluation board that supports flexible control strategies.

High-voltage power stage with space-efficient evaluation board for smaller, tougher motor drives

高压功率级,配备紧凑型评估板,适用于更小巧、更坚固的电机驱动器


Accelerating development of compact and reliable fans and pumps built with energy-efficient motors, STMicroelectronics has introduced the PWD5T60 three-phase driver with a ready-to-use evaluation board that supports flexible control strategies.

为加快紧凑、可靠型风扇和泵产品(采用节能电机)的开发,意法半导体推出了PWD5T60三相驱动器,该驱动器具有支持灵活控制策略的即用型评估板。

Suited to applications up to 500V, the PWD5T60 integrates a gate driver and six power MOSFETs with RDS(ON) of 1.38Ω, enabling the device to achieve an outstanding energy to area rating. Zero-drop bootstrap diodes are also built-in, requiring minimal external components to complete the circuit in only 30% of the board area of an equivalent driver built with discrete components. The propagation delays of high-side and low-side MOSFETs are closely matched, which eliminates cycle distortion and maximizes flexibility to set the operating frequency for optimum response and energy efficiency.

PWD5T60适用于高达500V的应用,集成了一个栅极驱动器和六个功率MOSFET,RDS(ON)为1.38Ω,能够实现出色的能量面积比额定值。零压降自举二极管同样内置,只需极少的外部组件,即可在等效驱动器(由分立器件构建)30%的板面积内完成电路。高边/低边MOSFET的传播延迟紧密匹配,消除了周期失真,并能显著提高设置工作频率的灵活性,以实现理想的响应和能效。

The EVLPWD-FAN-PUMP evaluation board, released at the same time, helps developers quickly explore the value this driver can deliver in projects up to 100W. The board combines the PWD5T60 with an STM32G0 microcontroller (MCU) that can handle field-oriented control (FOC) or 6-step control of permanent magnet synchronous motors (PMSMs) and brushless DC (BLDC) motors. With configurable single or three-shunt sensing and leveraging the PWD5T60’s high feature integration to achieve a compact, circular form factor, the board is optimized for use with fans and pumps. The board also features a power-supply stage to generate 12V and 3.3V supply voltages for the application and comes with a complete AC line filter at the input.

同步发布的EVLPWD-FAN-PUMP评估板可帮助开发者快速探索该驱动程序在高达100W的项目中可提供的价值。该板将PWD5T60与STM32G0微控制器 (MCU) 相结合,可处理永磁同步电机 (PMSM) 和无刷直流 (BLDC) 电机的磁场定向控制 (FOC) 或6步控制。为搭配风扇和泵使用,意法半导体通过可配置的单分流或三分流传感,专门对该板进行了优化,并利用PWD5T60的高功能集成来实现紧凑的圆形外形。该板还配有一个电源级,可为应用产生12V和3.3V的电源电压,并在输入端配备了完整的交流线路滤波器。

Featuring on-board bus-voltage sensing, the EVLPWD-FAN-PUMP board helps utilize the PWD5T60’s safe design that provides undervoltage lockout (UVLO) for each bootstrap section to prevent operation in dangerous or low-efficiency conditions. Engineered for robustness, the PWD5T60 also features cross-conduction prevention with interlocking and pre-programmed default deadtime to ensure failsafe protection against shoot-through currents. In addition, excellent below-ground robustness ensures faultless performance.

EVLPWD-FAN-PUMP板具有板载总线电压传感功能,有助于利用PWD5T60的安全设计,为各自举部分提供欠压锁定 (UVLO),以避免在危险或低效条件下运行。PWD5T60专为打造稳健性而设计,具有互锁和预编程默认死区的防交叉传导功能,以确保对击穿电流的故障安全保护。此外,其出色的地下稳健性也保证了出色的无故障性能。

The PWD5T60 has a smart shutdown feature that uses a comparator for fast-acting overcurrent prevention. The output turns off immediately when a fault is detected, while the subsequent output-disable duration is programmed by connecting a capacitor and optional pull-up resistor to a dedicated pin. The turnoff response is unaffected by these components, letting product developers optimize the duration to allow time for faults to clear while always ensuring instant turn-off.

PWD5T60具有智能关机功能,可通过比较器来快速防止过电流。当检测到故障时,输出会立即关闭,随后将电容器和上拉电阻器(可选)连接到专用引脚,以此来对输出禁用持续时间进行编程。关闭响应不受此类组件的影响,让产品开发者得以优化持续时间,以便有充足的时间来清除故障,并确保关闭的即时性。

The driver has a wide input supply voltage range from 9V to 20V for optimum flexibility, while CMOS/TTL-compatible logic inputs down to 3.3V simplify interfacing with a host controller.

该驱动器具有从9V到20V的宽输入电源电压范围,可实现出色的灵活性,而低至3.3V的CMOS/TTL兼容逻辑输入则简化了与主机控制器的接口连接。

The PWD5T60 is in full production and available in a compact 12mm x 12mm VFQFPN package only 0.95mm high, from $3.28 for orders of 1000 pieces.

PWD5T60现已全面投产,采用紧凑型12mm x 12mm VFQFPN封装(高度仅0.95mm);千片起订单价3.28美元。

The EVLPWD-FAN-PUMP evaluation board is available now from the eSTore, at the budgetary price of $102.00. The board delivers plug-and-play convenience leveraging FOC and 6-step control firmware in the X-CUBE-MCSDK motor-control software development kit available free of charge at st.com.

EVLPWD-FAN-PUMP评估板现可从电子商城购买,建议零售价102.00美元。该板利用X-CUBE-MCSDK电机控制软件开发套件中的FOC和6步控制固件提供即插即用的便利性,该套件可在st.com免费获得。

本站声明: 本文章由作者或相关机构授权发布,目的在于传递更多信息,并不代表本站赞同其观点,本站亦不保证或承诺内容真实性等。需要转载请联系该专栏作者,如若文章内容侵犯您的权益,请及时联系本站删除。
换一批
延伸阅读

LED驱动电源的输入包括高压工频交流(即市电)、低压直流、高压直流、低压高频交流(如电子变压器的输出)等。

关键字: 驱动电源

在工业自动化蓬勃发展的当下,工业电机作为核心动力设备,其驱动电源的性能直接关系到整个系统的稳定性和可靠性。其中,反电动势抑制与过流保护是驱动电源设计中至关重要的两个环节,集成化方案的设计成为提升电机驱动性能的关键。

关键字: 工业电机 驱动电源

LED 驱动电源作为 LED 照明系统的 “心脏”,其稳定性直接决定了整个照明设备的使用寿命。然而,在实际应用中,LED 驱动电源易损坏的问题却十分常见,不仅增加了维护成本,还影响了用户体验。要解决这一问题,需从设计、生...

关键字: 驱动电源 照明系统 散热

根据LED驱动电源的公式,电感内电流波动大小和电感值成反比,输出纹波和输出电容值成反比。所以加大电感值和输出电容值可以减小纹波。

关键字: LED 设计 驱动电源

电动汽车(EV)作为新能源汽车的重要代表,正逐渐成为全球汽车产业的重要发展方向。电动汽车的核心技术之一是电机驱动控制系统,而绝缘栅双极型晶体管(IGBT)作为电机驱动系统中的关键元件,其性能直接影响到电动汽车的动力性能和...

关键字: 电动汽车 新能源 驱动电源

在现代城市建设中,街道及停车场照明作为基础设施的重要组成部分,其质量和效率直接关系到城市的公共安全、居民生活质量和能源利用效率。随着科技的进步,高亮度白光发光二极管(LED)因其独特的优势逐渐取代传统光源,成为大功率区域...

关键字: 发光二极管 驱动电源 LED

LED通用照明设计工程师会遇到许多挑战,如功率密度、功率因数校正(PFC)、空间受限和可靠性等。

关键字: LED 驱动电源 功率因数校正

在LED照明技术日益普及的今天,LED驱动电源的电磁干扰(EMI)问题成为了一个不可忽视的挑战。电磁干扰不仅会影响LED灯具的正常工作,还可能对周围电子设备造成不利影响,甚至引发系统故障。因此,采取有效的硬件措施来解决L...

关键字: LED照明技术 电磁干扰 驱动电源

开关电源具有效率高的特性,而且开关电源的变压器体积比串联稳压型电源的要小得多,电源电路比较整洁,整机重量也有所下降,所以,现在的LED驱动电源

关键字: LED 驱动电源 开关电源

LED驱动电源是把电源供应转换为特定的电压电流以驱动LED发光的电压转换器,通常情况下:LED驱动电源的输入包括高压工频交流(即市电)、低压直流、高压直流、低压高频交流(如电子变压器的输出)等。

关键字: LED 隧道灯 驱动电源
关闭